Oil Series Pleated filter cartridges
General Description:
DLOF Series Pleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high qualityFibres. The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, Less work changing the cartridges and less waste and the Fully thermal welded construction can be used safely on High temperature Oily water,solvents,acid and diesel.
Applications
●Chemical
●Oil & Gas Ind
● Metal Treatment
● Process Water
● Electronis
● Coatings, Paint
● Petroleum
●Prefiltration
Features
● Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
● Low cost because of large filter area and reduces labor costs to change
● The Absolute glass fiber media supplies optimal eddiciency of solids removal.
Specifications
Filter Media: PP,PET, Glass Fiber
End Cap Material: PP , ABS
Center Core: PP, ABS
Netting: PE
Seal Material: Silicone, EPDM, NBR, Viton
End Cap Types:DOE, -226/Flat End
Length:10",20",30",40"
Outside Diameter:64mm
Inside Diameter:28mm
Removal Ratings:1μm,2μm,5μm,10μm,20μm,50μm
Operating Pressure and temperature:
The pleated cartridge construction will withstand differential
Pressures up to 60psi(4bar) at ambient temperature.
The optimum changeout differential pressure is 35psi(2.5bar) up to 52℃.
Service condition:
500kPa(5bar)by 20℃
300kPa(3bar)by 65℃
Beta: 5000(99.98% removal efficiency) for glass fiber media.
Construction: Fully thermal welded.
ORDERING INFORMATION
DLOF*#=+x(e.g.,DLOF40PP5EI = 40" PP,5um,Seal Material:Silicone,-226/Flat End
Code =Rating (End Cap colour)
1 1um (Light Green)
2 2um( white)
5 5um (Orange)
10 10um(Red)
20 20um(Brown)
50 50um(Grey)
Code * Length
10
20
30
40
Code #filter media
PP PP
GF Glassfiber
PET Polyester
Code + seal material
E EPDM
S SILICONE
V VITON
B NBR
Code X end cap types
Ⅰ DOE
Ⅱ -222/flat end